How many users are logged on/connected to a server?
Sometimes we may need to know how many users are logged on to a
(file) server, like maybe when there is a performance degradation.
At the server's console itself, with native commands only:
NET SESSION | FIND /C "\\"
Remotely, with the help of
SysInternals'
PSTools:
PSEXEC \\servername NET SESSION | FIND /C "\\"
By replacing
FIND /C "\\" by
FIND "\\" (removing the
/C switch) you'll get a
list of logged on users instead of just the
number of users.
Who is logged on to a computer?
We often need to know who is currently logged on to a remote computer.
With native Windows (up to and including XP) commands only:
NBTSTAT -a remotecomputer | FIND "<03>" | FIND /I /V "remotecomputer"
The first name in the list usually is the logged on user (try playing with the
NET NAME command to learn more about the names displayed by
NBTSTAT).
This is the
fastest way to find the logged on user name, and the results that you
do get
are correct, but
NBTSTAT won't always return a user name, even when a user
is logged on.
Using
WMIC (Windows XP Professional and later):
WMIC /Node:remotecomputer ComputerSystem Get UserName
This is arguably the most reliable (native) command to find out who is logged on.
With the help of
SysInternals'
PSTools:
PSLOGGEDON -L \\remotecomputer
or:
PSEXEC \\remotecomputer NET CONFIG WORKSTATION | FIND /I " name "
or:
PSEXEC \\remotecomputer NET NAME
or for Windows XP only:
PSEXEC \\remotecomputer NETSH DIAG SHOW COMPUTER /V | FIND /i "username"
Using
REG.EXE (Windows 2000 and later):
FOR /F %%A IN ('REG Query \\remotecomputer\HKU ˆ| FINDSTR /R /B /C:"HKEY_USERS\\S-1-5-[0-9][0-9]-[0-9-]*$"') DO (
FOR /F "tokens=3 delims=\" %%B IN ('REG Query "\\remotecomputer\%%A\Volatile Environment"') DO (
SET LoggedinUser=%%B
)
)
or for Windows 7:
FOR /F %%A IN ('REG Query \\remotecomputer\HKU /K /F "S-1-5-21-" ˆ| FINDSTR /R /B /C:"HKEY_USERS\\S-1-5-[0-9][0-9]-[0-9-]*$"') DO (') DO (
FOR /F "tokens=2*" %%B IN ('REG Query "\\remotecomputer\%%~A\Volatile Environment" /V "UserName" ˆ| FIND /V ":"') DO (
SET LoggedinUser=%%C
)
)
NETSH and
WMIC are for XP or later, and are the most reliable of all commands shown here.
WMIC requires WMI enabled remote computers and Windows XP on the administrator's computer;
NETSH requires Windows XP on the local
and remote computers.
PSLOGGEDON is a more accurate solution than
NBTSTAT, but it will return the last logged on user if no one is currently logged on.
The
NET and
NBTSTAT commands show more or less identical results, but the
NBTSTAT command is
much faster.
The
REG command is accurate, but may need to be modified depending on the version used.
More information on REG versions can be found on my
REG Query page.
For Windows NT 4 and 2000: use
NBTSTAT (fast, but it won't always return the user name!), and only switch to
REG if
NBTSTAT doesn't return a user name (modify the REG command for Windows NT 4).
For Windows XP and later: if you want to search lots of computers for logged on users, I recommend you try
NBTSTAT first (fast, but it won't always return the user name!), and only switch to
NETSH,
REG or
WMIC (accurate) if
NBTSTAT doesn't return a user name.
Credits: Jiří Janyška (WMIC command) and Matthew W. Helton (NETSH command).
What is this collegue's login name?
My collegues often forget to mention their logon account name when
calling the helpdesk, and the helpdesk doesn't always ask either.
I suppose they expect me to know all 1500+ accounts by heart.
With (native) Windows Server 2003 commands only:
DSQUERY USER -name *lastname* | DSGET USER -samid -display
| Note: |
Windows Server 2003's
"DSTools"
will work fine in Windows 2000 and XP too, when copied.
Keep in mind, however, that some Windows Server 2003 Active
Directory functionality is not available in Windows 2000
Active Directories. |
What is the full name for this login name?
With the native
NET command:
NET USER loginname /DOMAIN | FIND /I " name "
With (native) Windows Server 2003 commands:
DSQUERY USER -samid *loginname* | DSGET USER -samid -display
| Note: |
The NET command may seem more universal, because it requires neither
Active Directory nor Windows Server 2003 commands, but it is
language dependent!
For non-English Windows you may need to modify FIND's search
string. |
What groups is this user a member of?
In Windows NT 4 and later, users usually are members of global groups.
These global groups in turn are members of (domain) local groups.
Access permissions are given to (domain) local groups.
To check if a user has access to a resource, we need to check group membership
recursively.
With (native) Windows Server 2003 commands:
DSQUERY USER -samid loginname | DSGET USER -memberof -expand
What permissions does a user have on this directory?
One could use the previous command to check what
permissions a user has on a certain directory.
However, sometimes
SHOWACLS from the
Windows Server 2003 Resource Kit Tools is a better alternative:
CD /D d:\directory2check
SHOWACLS /U:domain\userid
When did someone last change his password?
With the native
NET command:
NET USER loginname /DOMAIN | FIND /I "Password last set"
How do I reset someone's password?
With the native
NET command:
NET USER loginname newpassword /DOMAIN
With (native) Windows Server 2003 commands:
DSQUERY USER -samid loginname | DSMOD USER -pwd newpassword
| Note: |
To prevent the new password from being displayed on
screen replace it with an asterisk (*); you will then
be prompted (twice) to type the new password "blindly". |
Is someone's account locked?
With the native
NET command:
NET USER loginname /DOMAIN | FIND /I "Account active"
The account is either locked ("Locked") or active ("Yes").
How to unlock a locked account
With the native
NET command:
NET USER loginname /DOMAIN /ACTIVE:YES
or, if the password needs to be reset as well:
NET USER loginname newpassword /DOMAIN /ACTIVE:YES
Make sure a local user's password never expires
With
WMIC (Windows XP Professional or later):
WMIC.EXE /Node:remotecomputer Path Win32_UserAccount Where Name="user" Set PasswordExpires="FALSE"
Make sure a local user's password will expire
With
WMIC (Windows XP Professional or later):
WMIC.EXE /Node:remotecomputer Path Win32_UserAccount Where Name="user" Set PasswordExpires="TRUE"
List all domains and workgroups in the network
With the native
NET command:
NET VIEW /DOMAIN
List all computers in the network
With the native
NET command:
NET VIEW
or, to list the names only:
FOR /F "skip=3 delims=\ " %%A IN ('NET VIEW') DO ECHO.%%A
delims is a backslash, followed by a tab and a space.
List all domain controllers
With native Windows 2000 commands:
NETDOM QUERY /D:MyDomain DC
NETDOM is part of the support tools found in the
\SUPPORT directory of the Windows 2000
installation CDROM.
With (native) Windows Server 2003 commands (Active Directory only):
DSQUERY Server
or, if you prefer host names only (tip by Jim Christian Flatin):
DSQUERY Server -o rdn
Find the primary domain controller
With native Windows 2000 commands:
NETDOM QUERY /D:MyDomain PDC
or, to find the FSMO with (native) Windows Server 2003 commands
(Active Directory only):
NETDOM QUERY /D:mydomain.com FSMO
NETDOM is part of the support tools found in the
\SUPPORT directory of the Windows 2000
installation CDROM.
List all member servers
With native Windows 2000 commands:
NETDOM QUERY /D:MyDomain SERVER
NETDOM is part of the support tools found in the
\SUPPORT directory of the Windows 2000
installation CDROM.
List all workstations
With native Windows 2000 commands:
NETDOM QUERY /D:MyDomain WORKSTATION
NETDOM is part of the support tools found in the
\SUPPORT directory of the Windows 2000
installation CDROM.
Delete a computer account
With native Windows 2000 commands:
NETDOM /DOMAIN:MyDomain MEMBER \\computer2Bdeleted /DELETE
NETDOM is part of the support tools found in the
\SUPPORT directory of the Windows 2000
installation CDROM.
"I need an up-to-date list of disk space usage for all servers, on my desk in 5 minutes"
Sounds familiar?
With (native) Windows XP Professional or Windows Server 2003 commands:
FOR /F %%A IN (servers.txt) DO (
WMIC /Node:%%A LogicalDisk Where DriveType="3" Get DeviceID,FileSystem,FreeSpace,Size /Format:csv | MORE /E +2 >> SRVSPACE.CSV
)
The only prerequisites are:
- SRVSPACE.CSV should not exist or be empty,
- a list of server names in a file named SERVERS.TXT, one server name on each line,
- and WMIC.EXE, which is native in Windows XP Professional and later.
The CSV file format is ServerName,DeviceID,FileSystem,FreeSpace,Size
(one line for each harddisk partition on each server).
If you have a strict server naming convention, SERVERS.TXT itself can
be generated with the
NET command:
FOR /F "delims=\ " %%A IN ('NET VIEW ^| FINDSTR /R /B /C:"\\\\SRV\-"') DO (>>SERVERS.TXT ECHO.%%A)
| Notes: |
(1) |
assuming server names start with "SRV-"; modify to match your own naming convention. |
|
(2) |
delims is a backslash, followed by a tab and a space. |
List all drivers on any PC
With (native) Windows XP Professional or Windows Server 2003 commands:
DRIVERQUERY /V /FO CSV > %ComputerName%.csv
Or, for remote computers:
DRIVERQUERY /S remote_PC /V /FO CSV > remote_PC.csv
List all printers on any PC
With (native) Windows XP+ commands:
WMIC /Node:remote_PC Path Win32_Printer Get DeviceID
List all local administrators
With (native) Windows NT 4+ commands:
NET LOCALGROUP Administrators
Or, to remove header and footer lines:
FOR /F "delims=[]" %%A IN ('NET LOCALGROUP Administrators ˆ| FIND /N "----"') DO SET HeaderLines=%%A
FOR /F "tokens=*" %%A IN ('NET LOCALGROUP Administrators') DO SET FooterLine=%%A
NET LOCALGROUP Administrators | MORE /E +%HeaderLines% | FIND /V "%FooterLine%"
Locate rogue DHCP servers
Never had an "illegal" router wreaking havoc on your network yet...?
With a (native) Windows Server 2003 command:
DHCPLOC -p local_IP_address [ valid_DHCP_server1 [ valid_DHCP_server2 [ .. ] ] ]
DHCPLOC.EXE is native in Windows Server 2003, and will run in Windows XP if copied/installed.
I didn't test this in Windows Server 2003 yet, but in Windows XP you need to press "d" to start the discovery, or "q" to quit.
Disable Windows Firewall for domain only
Disable the firewall only when the computer (e.g. a laptop) is connected to the domain:
NETSH Firewall Set OpMode Mode = DISABLE Profile = DOMAIN
Completely disable Windows Firewall (not recommended)
Disable the firewall comletely (not recommended unless an alternative enterprise firewall is used that requires you to do so):
SC [ \\Remote_computer ] Stop SharedAccess
SC [ \\Remote_computer ] Config SharedAccess start= disabled
Is IP v4 supported on this computer?
Check if IP v4 is supported on the local computer:
PING 127.0.0.1 | FIND "TTL=" >NUL 2>&1
IF ERRORLEVEL 1 (ECHO IP v4 NOT supported) ELSE (IP v4 supported)
or:
WMIC Path Win32_PingStatus WHERE "Address='127.0.0.1'" Get StatusCode /Format:Value | FINDSTR /X "StatusCode=0" >NUL 2>&1
IF ERRORLEVEL 1 (ECHO IP v4 NOT supported) ELSE (IP v4 supported)
The
WMIC command is faster, but requires Windows XP Professional or later.
Is IP v6 supported on this computer?
Check if IP v6 is supported on the local computer:
PING ::1 | FINDSTR /R /C:"::1:[ˆ$]" >NUL 2>&1
IF ERRORLEVEL 1 (ECHO IP v6 NOT supported) ELSE (IP v6 supported)
or:
WMIC Path Win32_PingStatus WHERE "Address='::1'" Get StatusCode >NUL 2>&1
IF ERRORLEVEL 1 (ECHO IP v6 NOT supported) ELSE (IP v6 supported)
The
WMIC command is faster, but requires Windows XP Professional or later.
Which updates were installed on this compter?
Windows 7 and 8:
DISM /Online /Get-Packages
or:
WMIC QFE List
DISM will return
far more details than
WMIC.
Windows 2000 and XP:
QFECHECK /V
SOURCE :http://www.robvanderwoude.com
